Variable Speed Multistage Pump

Variable Speed Multistage Pump

This variable speed multistage pump is a smart solution for systems with changing water needs. We add a frequency converter to the pump drive. The converter changes the motor speed based on real-time demand. This means the pump runs only as fast as needed. It does not waste power. Our product cuts energy use compared to valve throttling or start-stop control. We have seen energy savings of 20% to 40% in real building projects.
Send Inquiry
Product Introduction

Speed Control That Matches Your Demand

 

product-1000-1000

This variable speed multistage pump is a smart solution for systems with changing water needs. We add a frequency converter to the pump drive. The converter changes the motor speed based on real-time demand. This means the pump runs only as fast as needed. It does not waste power. Our product cuts energy use compared to valve throttling or start-stop control. We have seen energy savings of 20% to 40% in real building projects. The pump gives steady pressure even when water use goes up and down. This makes our product a good choice for hotels, hospitals, and office buildings. We build it with the same strong structure as our standard pumps. The motor has a separate cooling fan. This keeps it cool at low speeds. Your system runs better with our product.

 

Tested Across the Full Speed Range

 

We test every variable speed multistage pump across its full speed range. The pump and motor must have perfect alignment. The bearings need correct fit. The seals must pass our leak tests. We run each product at 20 Hz, 30 Hz, 40 Hz, and 50 Hz. We check vibration and temperature at each point. This ensures stable operation at any speed. The controller uses PID logic. You can set it for constant pressure or constant flow. The controller adjusts speed automatically. This gives precise control without manual work. We have supplied products for many booster systems in China and abroad. A property manager in Shanghai told us their energy bill dropped by 32% after they switched to our product. That kind of result builds trust.

 

Flexible Setup for Your Project

 

This variable speed multistage pump fits many types of systems. It works for constant pressure water supply in tall buildings. It serves industrial processes that need steady flow. It also works for HVAC chilled water and cooling water loops. Modern farms use our product for smart irrigation. The pump adjusts to soil moisture and crop needs. Flow rates go from 6 to 720 m³/h. Heads range from 10 to 650 meters. Speed adjusts from 20 to 60 Hz. The motor uses IP55 protection. The controller uses IP54. Power input is 380V/50Hz as standard. We can change this for your local grid. Our product gives you efficiency, control, and reliability.

 

Product Parameters

 

Parameter

Range

Flow Rate

6 ~ 720 m³/h

Head

10 ~ 650 m

Speed Range

20 ~ 50/60 Hz

Medium Temperature

≤ 80℃ (clean water)

Power Supply

380V/50Hz (customizable)

Motor Protection

IP55

Controller Protection

IP54

Control Mode

PID constant pressure / manual speed control

 

Hot Tags: variable speed multistage pump, China variable speed multistage pump manufacturers, suppliers, factory

Send Inquiry

Home

Phone

E-mail

Inquiry